1. COILS and STRIPS:
| Material type: |
Thickness: |
Width: |
CID: |
COD: |
Coil weight: |
| Hot rolled pickled and oiled: |
1,4–4,5 mm |
min. 30 mm
max. 1700 mm |
508 mm
or
610 mm |
max.
2000 mm |
max.
25 t |
| Hot rolled black: |
1,4–3,0 mm |
| Cold rolled: |
0,4–3,0 mm |
| Hot dip galvanized: |
0,5–4,0 mm |
| Electrolytic galvanized: |
0,5–3,0 mm |
2. SHEETS:
| - |
Rectangular cuts: |
Trapezoidal cuts: |
Cut-to-length cuts: |
| Thickness: |
0,5–2,5 mm |
0,5–2,5 mm |
1,5–6,0 mm |
| Width: |
150–1800 mm |
250–1700 mm |
max. 1600 mm |
| Length: |
150–6000 mm |
250–3000 mm |
500–7500 mm |
Drawing
DX51D+Z – DX56D+Z by EN10346
also possible in galfan ZA (Zn-Al) and galvannealed ZF (Zn-Fe)
Structural
S220GD+Z – S350GD+Z by EN10346
also possible in galfan ZA (Zn-Al)
High strength, micro-alloyed
HX260LAD+Z – HX420LAD+Z by EN10346
also possible in galfan ZA (Zn-Al) and galvannealed ZF (Zn-Fe)
Rephosphorized
HX220PD+Z – HX300PD+Z by EN10346
Interstitial free
HX180YD+Z – HX300YD+Z by EN10346
Bake hardening
HX180BD+Z – HX300BD+Z by EN10346
Dual phase
HCT450XD+Z – HCT780XD+Z by EN10346
Surface versions:
Flower: M (minimized spangle)
Surface quality: A (standard), B (improved)
Zn coating: 100 – 275 g/m2
Surface treatment: O (oiled), C (chromated)
